Domain | www.elektrod.uz |
IP | 95.213.255.249 |
Phone | (+ 998 70) 912-24-23 |
Address | 110502, Bekabad, Tashkent region, Republic of Uzbekistan. |
Rating |
Elektrod.uz - Uzbek metallurgical plant
Production of electrodes at «Uzbek metallurgical plant»JSPA has been started since 15.05.2007. The plant produced 81.8 tons of electrodes (brand UONI 13/55, type Ý46) in 2007. From 01.01.2008 till 01.06.2008 the plant produced 280.0 tons of electrodes (brand UONI 13/55, type Ý46, and diameter 3mm, 4mm and 5mm). All electrodes are certificated at the National Certification System ¹0542968-2.
Equipment (press for coating electrodes, mixer, briquetting press, and machine for scarfing faces of electrodes, cleaning machine for rejected electrodes) is intended directly for manufacture of welding electrodes. Equipment is supplied by «AZTM», Republic of Kazakhstan.
Equipment for manufacture of charge (jaw crusher, cone-type crusher, and screen) is supplied by Russian enterprise «Mechanoobr-tekhnika». Other equipment such as machine for heat treatment of electrodes and auxiliary devices is developed and manufactured at the plant in our specialists’ participation. Putting into commissioning production and development of technology for manufacture of welding electrodes is carried out by efforts of the plant.
After successful learning the first line of the production, direction of the plant made decision to extend production and to buy the second line for manufacture of welding electrodes.
The second line production of welding electrodes was installed and put into commissioning successfully in February 2009. Also, manufacture of welding electrodes (brand UONI 13/55, diameter 3mm and 5mm) was learnt.
These products passed certification tests at the Regional Test Centre and Certification of the Republic of Uzbekistan (certificate ¹20542968-2).
Learning production of AC and DC welding electrodes, type Ý46, brand MP-ÇÓ has been started since 01.06.2008. After carrying out necessary tests, mass output of these electrodes has been started this month.
Since putting into commissioning bay for manufacture of electrodes, the plant produced 81.80 tons of electrodes in 2007. From 01.01.2008 till 01.06.2008 the plant produced and sold 280 tons of electrodes (brand UONI 13/55, diameter 3mm, 4mm and 5mm).
Before realization all electrodes pass necessary tests according to GOST 9466-75, GOST 9467-75.
Equipment (press for coating electrodes, mixer, briquetting press, and machine for scarfing faces of electrodes, cleaning machine for rejected electrodes) is intended directly for manufacture of welding electrodes. Equipment is supplied by «AZTM», Republic of Kazakhstan.
Equipment for manufacture of charge (jaw crusher, cone-type crusher, and screen) is supplied by Russian enterprise «Mechanoobr-tekhnika». Other equipment such as machine for heat treatment of electrodes and auxiliary devices is developed and manufactured at the plant in our specialists’ participation. Putting into commissioning production and development of technology for manufacture of welding electrodes is carried out by efforts of the plant.
After successful learning the first line of the production, direction of the plant made decision to extend production and to buy the second line for manufacture of welding electrodes.
The second line production of welding electrodes was installed and put into commissioning successfully in February 2009. Also, manufacture of welding electrodes (brand UONI 13/55, diameter 3mm and 5mm) was learnt.
These products passed certification tests at the Regional Test Centre and Certification of the Republic of Uzbekistan (certificate ¹20542968-2).
Learning production of AC and DC welding electrodes, type Ý46, brand MP-ÇÓ has been started since 01.06.2008. After carrying out necessary tests, mass output of these electrodes has been started this month.
Since putting into commissioning bay for manufacture of electrodes, the plant produced 81.80 tons of electrodes in 2007. From 01.01.2008 till 01.06.2008 the plant produced and sold 280 tons of electrodes (brand UONI 13/55, diameter 3mm, 4mm and 5mm).
Before realization all electrodes pass necessary tests according to GOST 9466-75, GOST 9467-75.
Date: 2012-02-15 | Hits: 3066